Sunday, February 23, 2014

Wayne Dalton Quantum 3212 Instructions

The Wayne Dalton Quantum 3212 uses three buttons to transmit and control the Wayne Dalton garage door openers. This unit is programmable and is compatible with most of the Wayne Dalton doors and other brands of door openers. The Quantum does not work with internal auto-based homelink link systems. Program your Quantum and sync it with the door opener for hands-free garage door service.


Instructions


1. Engage any emergency disconnect bars on the garage door opener. Press the Program button on the Quantum and look for the green LED light.


2. Press your choice of the three buttons within 30 seconds of the green LED light coming on. Hold the button until the green LED light goes off.


3. Engage the garage door emergency bar.


4. Press the transmitter button used in Step 2 (the button you choose to use for the garage door transmission). Wait for the door to open as the Quantum is now programmed for your door.


Tips Warnings


You can program all three buttons to different doors if you have more than one. Follow the steps, changing the button for your other two doors.








Related Posts:




  • Program My Keypad For My Wayne Dalton Garage Door

    Program My Keypad for My Wayne Dalton Garage DoorWayne Dalton has been manufacturing residential garage doors and garage door openers for nearly 60 years. Wayne Dalton also offers electronic wirel...


  • Change The Code On A Wayne Dalton Keypad

    You operate Wayne Dalton garage door openers from a control panel installed inside your garage, a remote control or a keypad installed on the outside of the garage. The keypad operates the door wh...


  • Genie Keyless Entry Instructions

    Open a garage the keyless way.There are three basic types of Genie Keyless Entry systems, including two Intellicode Keyless Entry Systems and the Wireless Keypad Entry System. The Intellicode Keyl...


  • Change The Code On A Phantom Garage Door Opener

    Change the Code on a Phantom Garage Door OpenerThe Phantom garage door opener by Overhead Door, uses a push button to quickly program remotes and keypads. When you lose a remote control, or feel t...


  • Program A Remote For A Genie 1/2 Hp Garage Door Opener

    The Genie 1/2 HP garage door opener is a heavy duty opener. When replacing the remote controls, the new remotes require programming. Programming the remote for a Genie 1/2 HP garage door opener is...