A common problem that develops with kitchen faucet sprayers is a loss of adequate water pressure. If you are having problems keeping the pressure on your sprayer, check a few things that can be easily fixed to restore a good flow of water.
Instructions
1. Remove the sprayer head, and turn on the water. If you get adequate water flow, there may be a problem in the sprayer head. Unscrew the nozzle, and check to see if the mesh filter is clogged and/or has mineral deposit buildup. Soak dirty filters in a cup of vinegar or CLR and hot water to dissolve gunk.
2. Check the hose for any cracks, holes or leaks. If the hose is damaged, check with the faucet manufacturer for a replacement and instructions on install.
3. Remove the washer that sits between the sprayer head and the sprayer handle. Make sure it is in good condition. If not, replace it.
4. Try cleaning the diverter valve if the problem does not appear to be in the nozzle or hose. The diverter valve is inside the base of the faucet. Turn off the main water valves for the sink, and turn on faucets to drain out water. Remove the faucet spout with pliers, and check the diverter valve and area around the valve for clogging and mineral buildup. Clean the valve and the area around the valve with a toothbrush and vinegar or CLR and hot water. You can also soak the valve in the cleaning solution.
5. Reassemble and try turning on the water. If the pressure is still low, you may have a faulty diverter valve. Check with the faucet manufacturer for a replacement and instructions on install.
Tags: keep, pressure, kitchen, sink, sprayer, diverter valve, sprayer head, adequate water, area around, area around valve