Well-supported bed frames help you get a good night's sleep.
Antique bed frames can become wobbly over many years, so they do not support mattresses and box springs well. Antique beds use wooden slats that rest on a ledge on each side of the side rails. The wooden slats deteriorate with time and may splinter or break, allowing the mattress or box springs to sag in that area. You can make new bed slats with common tools around the house to make your bed frame sturdier.
Instructions
1. Place the tip of a measuring tape inside the bed frame near the headboard against one side rail. Stretch the measuring tape to the opposite side rail and write down the measurement.
2. Measure the width near the foot of the bed in the same manner. If the measurement is the same as the first one, the frame is square and requires all the same width of boards. If the measurement varies by 1/2-inch or more you will need additional measurements.
3. Take additional measurements of the width of a twin size bed frame in four equal distances down the length of the bed. Measure a queen bed frame in five places and a king bed frame in six equal distances. Number your measurements on a piece of paper with slat one near the headboard, then slat two, three and so forth with a measurement for each one.
4. Subtract 1/2-inch from each measurement. Cut a 1-inch by 4 inch board with a saw for each bed slat in this size and number each one on the board with a marker.
5. Place the slats in the antique bed frame. Tighten all of the nuts and bolts or screws on the frame with an adjustable wrench or screwdriver. You can place a mattress directly on the slats for a platform bed or first place box springs and then a mattress for extra sturdiness.
Tips Warnings
If your bed frame is wobbly after adding the bed slats, drill a hole in the side rails and through the bed slats. Insert and tighten a screw in each end of each slat for maximum sturdiness.
Related Posts:
Make A Basic Bed Frame
A wooden bed frame can be easily constructed with the proper tools.Building your own bed frame is an excellent way to save money. The only limit to your bed frame design is your skill as a carpent...
Assemble A Metal Bed Frame
Assemble a Metal Bed FrameMetal bed frames vary by size and specific design, but assembling them is usually fairly straightforward. If you don't have specific instructions for your metal bed frame...
Strengthen A Bed Frame
There are two bed frame problems for which strengthening can be appropriate. You can stabilize a wobbly bed frame with cross braces, and you can shore up a sagging frame with under-mattress materi...
