A trampoline has four key components.
Trampoline replacement parts need to fit properly. This means the four key areas of a trampoline should be measured: frame, mat, springs and the number of springs on the trampoline.
Frame Size
The diameter of the trampoline should be measured from end to end. Most large trampolines range from 8 to 16 feet. Three or four different measurements should ensure accuracy.
Mat Size
Trampoline mats are also measured from end to end sans the steel rings and springs. Measurements must be taken from one end of the mat material to another; this should be done at least three or four times for correct measurements.
Trampoline Springs
A couple of trampoline springs should be removed and measured lengthwise from one arch of the hook to the other arch of the hook. This should not be done while they are attached to the trampoline since they are stretched. Many springs range from 4.5 to 9 inches.
Number of Springs
This is the easiest task; The number of spring holes that are on the frame must be counted or the number of rings on the mat.
Related Posts:
Care For Trampolines In The Winter
Care for Trampolines in the WinterTaking the extra time in the winter to protect your trampoline can be the difference between a long life span for your trampoline and a short one. The amount of m...
How Do You Measure A Trampoline For An Enclosure
Measure your trampoline for the properly sized enclosureA trampoline enclosure is an important safety mechanism for all who use it. You want to be sure you measure your trampoline's dimensions acc...
Paint A Trampoline
Trampolines are usually relatively safe, but it is still a good idea to use caution when jumping on one.Trampolines are large, usually circular, spring-loaded sheets that are used for jumping on....
